Avant-Easy-Change Program
Fast, concisely fitting changes.
Avant-Easy-Change Program
The Avant-Easy-Change heads fit concisely and are variable in diameter and pitch. An alternative to VHM shank end mills when the depths of cut are small. The Avant-Easy-Change program is a proven solution designed for maximum Q.
Avant-Easy-Change Program
Types
Avant-Easy-Change | T-slot milling cutter ETC90
- High performance T-slot milling cutter, DIN 650-compliant
- Form and force locking cross and/or star pull-in step
- Utmost change accuracy
| Kappa angle | 90° |
| Diameter | 20 – 31 mm |
| hmax | 0.06 – 0.1 mm |
Avant-Easy-Change | Turbavant SP18
- HPC-milling cutter with exchangeable milling head
- force locking cross and/or star pull-in step
- Enormous change accuracy
- Rugged construction
| Ramp angle | 1.2° + 2.1° |
| Diameter | 16 – 25 mm |
| ap Depth of cut | 0.8 mm |
| hmax | 0.05 – 0.08 mm |
Avant-Easy-Change | Shank end mill TS90
- Alternative to VHM shank end milling cutter in combination with small depths of cut
- Utmost change accuracy
- Form and force locking cross and/or star pull-in step
| Kappa angle | 90° |
| Diameter | 14 – 20 mm |
| ap Depth of cut | 6.0 mm |
| hmax | 0.12 – 0.2 mm |
Avant-Easy-Change | Shank end mill XS90
- Variable diameters and number of teeth
- Form and force locking cross and/or diamond pull-in step
- Utmost change accuracy
| Kappa angle | 90° |
| Diameter | 16 – 28 mm |
| ap Depth of cut | 8.0 – 15.0 mm |
| hmax | 0.12 – 0.2 mm |
Tool Program | Technical Data
All data and facts are included in our catalogue:
