Skip to main content

Face milling cutters and finishing cutters

High positive stability

Massive roughing and ultrafine surface finishing

Maintain complete stability while running massive depths of cuts. Attain maximum Q paired with low power consumption. Achieve high steel and cast iron machining efficiency levels by combining the roughing and finishing processes using just one face milling cutter. Large variety program for standard tooling and for turnkey solutions. Perfectly µ-precise surfaces.

Face milling cutters and finishing cutters

Types

Face milling cutters HD60

Face milling cutter HD60

  • For universal use in cast iron and steel machining
  • Excellent surface quality due to wiper geometry
  • Variable clamping wedge system suitable for long- and short-chipping materials
Kappa angle 60°
Diameter 125 – 200 mm
ap Depth of cut 10 mm
hmax 0.3 – 0.65 mm

Download HD60 | PDF

Face milling cutters OE45

Face milling cutters OE45

  • Well suited for the powerful machining of stainless steel materials
  • Optimal chip removal through improved cutting edge geometry
  • All diameters with internal cooling
Kappa angle 45°
Diameter 63 – 160 mm
ap Depth of cut 4.5 mm
hmax 0.22 – 0.65 mm

Download OE45 | PDF

Face milling cutters KC1.1

  • For universal use in cast iron and steel machining
  • Excellent surface quality due to wiper geometry
  • Optimal chip removal through improved cutting edge geometry
Kappa angle 45°
Diameter 50 – 63 mm
ap Depth of cut 3.5 mm
hmax 0.3 – 0.6 mm

Download KC1.1 | PDF

Face milling cutters SE45 | SX45


  • Roughing and finishing with the same indexable insert
  • SE45 is optimal for long-chipping materials
  • SX45 for jobs requiring an increased number of teeth
Kappa angle 45°
Diameter 80 – 160 mm
ap Depth of cut 8.4 + 8.8 mm
hmax 0.3 – 0.65 mm

Download SE45 SX45 | PDF

Face milling cutters SE60

  • Up to 14 mm depth of cut for maximum Q
  • Minimal power consumption, maximum machining performance
Kappa angle 60°
Diameter 125 – 200 mm
ap Depth of cut 14 mm
hmax 0.45 – 0.65 mm

Download SE60 | PDF

Face milling cutters SN75

  • Kappa 75° – combinded with the robust cutting edges permit both, high tooth feed rate and excellent surface quality
  • 8-cutting edge, tangential SN indexable insert
  • Maximum metal removal rate combined with high process reliability
Kappa angle 75°
Diameter 80 – 200 mm
ap Depth of cut 5.5 mm
hmax 0.15 – 0.28 mm

Download SN75 | PDF

Face milling cutters SN87

  • Kappa 87° – can also be used as shoulder milling cutters
  • Multi-tooth design with fine pitch optimal for thin-walled parts
  • 8-cutting edge, tangential SN indexable insert
  • Robust and soft cutting
Kappa angle 87°
Diameter 50 – 160 mm
ap Depth of cut 5.0 – 7.0 mm
hmax 0.14 – 0.30 mm

Download SN87 | PDF

Finishing cutters EK90

Planfräser Finavant EK90

  • Highly precise finishing cutters with cartridge system
  • Simple handling in setting and insert replacement
  • Extremely high feed rates with 2-cutting edge ENFQ indexable insert
  • Two indexable insert sizes for low axial impact of compressive forces when machining steel
Axial run-out < 0.005 mm
Kappa angle 90°
Diameter 63 – 160 mm
ap Depth of cut 0.1 – 0.3 mm

Download EK90 | PDF

Finishing cutters SK90

  • Highly precise finishing cutters with cartridge system
  • Simple handling in setting and insert replacement
  • Excellent surface quality with 4-cutting edge SN indexable insert
  • Very wide wiper edge for optimum use in cast materials
Axial run-out < 0.005 mm
Kappa angle 90°
Diameter 100 – 160 mm
ap Depth of cut 0.1 – 0.3 mm

Download SK90 | PDF