Slot milling cutters GB18
The GB18 is a standard milling cutter. It slits and severs. It has double-cutting edge indexable inserts that are positively connected. This makes the GN18 extraordinarily reliable. And fast. Moreover, it boasts a compact design. To accommodate more teeth. They deliver… more Q.
- 2-cutting edge indexable insert
- Cutting width from 2.5 mm
- Excellent cutting force dissiption
- Narrow tooth pitch
- High feed rates
| Diameter | 80 – 160 mm |
| Width of cut B(h11) | 2 – 3.5 mm |
| Zeff | 8 – 22 |
| ae Width of cut | 18 – 43 mm |
Slot milling cutters GN18
The GN18 is a standard milling cutter. It slits and severs. It has double-cutting edge indexable inserts that are positively connected. This makes the GN18 extraordinarily reliable. And fast. Moreover, it boasts a compact design. To accommodate more teeth. They deliver… more Q.
- 2-cutting edge indexable insert
- Cutting width from 2.5 mm
- Excellent cutting force dissiption
- Narrow tooth pitch
- High feed rates
| Diameter | 80 – 160 mm |
| Width of cut B(h11) | 2 – 3.5 mm |
| Zeff | 8 – 22 |
| ae Width of cut | 18 – 44 mm |
Shoulder milling cutter SN90
- Crosscut angle 90°
- Economical with 8-edged tangential SN indexable insert
- Robust and easy-cutting and ideal for machining cast iron
| Kappa angle | 90° |
| Diameter | 50 – 160 mm |
| ap Depth of cut | 9.0 mm |
| hmax | 0.15 – 0.28 mm |
Face milling cutters SN75
- Kappa 75° – combinded with the robust cutting edges permit both, high tooth feed rate and excellent surface quality
- 8-cutting edge, tangential SN indexable insert
- Maximum metal removal rate combined with high process reliability
| Kappa angle | 75° |
| Diameter | 50 – 125 mm |
| ap Depth of cut | 5 mm |
| hmax | 0.16 – 0.28 mm |
Shell end mills UW90
- Large chip spaces and special geometry for machining titanium
- 4 cutting edge UD-indexable insert
- Internal cooling
| ap Depth of cut | 0.8 x D |
| Kappa angle | 90° |
| Diameter | 50 – 80 mm |
| hmax | 0.11 – 0.14 mm |
Shank end mill SC UW90
| Type | SCUW90 |
| Zeff | Z3 – 5 |
| Diameter | 6 – 18 mm |
Shank end mill SC CW90
| Type | SCCW90 |
| Zeff | Z4 |
| Diameter | 6 – 16 mm |
Shank end mill SC UD90
| Type | SCUD90 |
| Zeff | Z4 |
| Diameter | 6 – 16 mm |
Finishing cutters EK90
- Highly precise finishing cutters with cartridge system
- Simple handling in setting and insert replacement
- Extremely high feed rates with 2-cutting edge ENFQ indexable insert
- Two indexable insert sizes for low axial impact of compressive forces when machining steel
| Axial run-out | < 0.005 mm |
| Kappa angle | 90° |
| Diameter | 63 – 160 mm |
| ap Depth of cut | 0.1 – 0.3 mm |
Finishing cutters SK90
- Highly precise finishing cutters with cartridge system
- Simple handling in setting and insert replacement
- Excellent surface quality with 4-cutting edge SN indexable insert
- Very wide wiper edge for optimum use in cast materials
| Axial run-out | < 0.005 mm |
| Kappa angle | 90° |
| Diameter | 63 – 160 mm |
| ap Depth of cut | 0.1 – 0.3 mm |