Skip to main content

Shoulder milling cutters and shank end mills

High positive stability at 90°

High positive stability at 90°

Shoulder milling cutters with tangentially installed indexable inserts are more break resistant and deliver outstanding cast iron machining results thanks to fine tooth pitches. The high feed and depth of cut in roughing are also achieved when machining materials such as stainless and titanium; the surface quality is excellent. Optimum stability for high precision and maximum Q. Also with DIN-type screw-in connection.

Shoulder milling cutters and Shank end mills

Types

Shoulder milling cutters CP90 | CV90

  • The versions with Ø 25-40 mm are optimal for powerful milling on live tooling lathes and machining centers with rather low rigidity and drive power
  • DIN tool holders with standard adaptation shank and spindle connection for HSK, Capto and SK
  • Maximum break resistance through tangential mounting of the 4-cutting edge CN indexable insert
  • High combined feed per tooth and depths of cut
  • CV90: Fine tooth pitch is an advantage in cast iron machining precesses
Kappa angle 90°
Diameter 25 – 125 mm
ap Depth of cut 7.5 – 10.0 mm
hmax 0.10 – 0.21 mm

Download CP90 | CV90 | PDF

Shoulder milling cutters EP90 | EV90

  • Maximum break resistance through tangential mounting of the 4-cutting edge EN indexable insert
  • High combined feed per tooth and depths of cut
  • EV90: Fine tooth pitch is an advantage in cast iron machining processes
Kappa angle 90°
Diameter 40 – 125 mm
ap Depth of cut 7.5 – 10 mm
hmax 0.04 – 0.28 mm

Download EP90 | EV90 | PDF

Shoulder milling cutters HC90

  • Highly compatible with materials that are difficult to machine, such as stainless and titanium
  • High feed per tooth and depths of cut in 90°-machining
  • The new screw-in versions with Ø 25-40 mm are optimal for powerful milling on live tooling lathes and machining centers with rather low rigidity and drive power
Kappa angle 90°
Diameter 40 – 100 mm
ap Depth of cut 8.0 – 10.0 mm
hmax 0.08 – 0.25 mm

Download HC90 | PDF

Shoulder milling cutters LN90

Shoulder milling cutter LN90

  • With insert sizes for extremely high depths of cut in 90° machining
  • Enormous stability due to sturdy cutting wedge
  • Achieves excellent roughing and finishing surface quality
Kappa angle 90°
Diameter 50 – 160 mm
ap Depth of cut 10.0 + 20.0 mm
hmax 0.12 – 0.28 mm

Download LN90 | PDF

Shank end mills CS90

Shank end mill CS90

  • Maximum break resistance through tangential mounting of the 4-cutting edge CN indexable insert
  • Four cutting edges even in small indexable inserts
  • High combined feed per tooth and depths of cut
  • Fine tooth pitch is an advantage in cast iron machining processes
Kappa angle 90°
Diameter 25 – 40 mm
ap Depth of cut 7.0 mm
hmax 0.10 – 0.22 mm

Download CS90 | PDF